|
John Deere ComfortGard™
cabs
Design
John Deere
ComfortGard™ cab tractors are the most comfortable, quiet, and easy-to-use cab
tractors available anywhere. This premium customer solution was developed using
extensive customer research and validation, tools, and some of the most
advanced design techniques available.
Designed by John
Deere and built at John Deere's Waterloo Works factory in Waterloo, Iowa
Certified to the
highest safety standards in the industry
Fingertip
controls and an automotive-like fit and finish
Current and
potential customers are sure to appreciate what this cab has to offer…beginning
with an isolated cab. These cabs are designed with robust mounting points that
are integrated into the ROPS structure with a unique offset mounting design that
provides an ultra quiet ride.
A 4 post ROPS design, carefully laid out interior, and fuel tank located under
the left rear side of the operator's platform provide a full 360 degrees of
visibility.Operators will
enjoy a commanding view no matter what task is being performed
Raised header bar design allows customers - whether short or tall - to see the
loader bucket or pallet forks through virtually the full range of operation
Operator fatigue caused by awkward bending is reduced, leading to increased
overall productivity
The slow moving vehicle (SMV) sign can be easily removed and stored in the
operator's manual holder to provide a clear and unobstructed view for attaching
to implements and doing fieldwork
Ample headroom and curved glass on all four sides provides a spacious interior
and gives operators the feel of a ''big tractor'' cab
Operators are well-protected from the elements with a high
performance climate control system capable of a 30 degree temperature change
within just 5 minutes.
Makes any task
more enjoyable whether on a frigid winter day or a hot summer day
The cab is
completely sealed and pressurized to further protect the operator from the
elements
A standard
high-efficiency ''clean air'' filter keeps even the smallest dust and allergen
particles out
Cab comfort features
 Several
features are integrated into the design of the cab that deliver superior
operator comfort and visibility. These features include:
Ultra-quiet
interior
4-post ROPS with
curved glass for 360 degree visibility and spacious interior
High-performance
climate control system for maximum operator comfort
Raised
header-bar for maximum loader visibility
Right-hand
control center places most frequently used controls at operator's fingertips
Dash-mounted
4-wheel drive engagement means no awkward bending
Tilt steering
Flat
unobstructed foot platform
Deluxe cloth
seat with retractable seatbelt and armrests is standard equipment and provides
operators with excellent
back support
Standard
armrests provide additional operator comfort
Factory
installed deluxe air ride seat with adjustable backrest (standard on 4720;
optional on 3720) and adjustable armrests
Inside rearview
mirror provides rear visibility
Optional dual
exterior rearview mirrors for added rear visibility
Integrated
loader joystick control is ergonomically placed for maximum comfort during
operation
Interior dome
light with on, door, and off positions provides illumination in low light
conditions
Optional AM/FM
radio with CD player (field installed only) allows operators to personalize
their music selection
Standard sun
visor blocks unwanted sunlight
Creature
comforts like:
Dual cup holders
12-volt power supply
Cell phone storage
CD Storage
Hitch pin storage
Miscellaneous storage
Operator's manual holder
Integrated
handle provides convenient support for ingress and egress
Left side step
for convenient ingress and egress.
Cab operating features
 The
right-hand control panel positions the most frequently used controls at the
operator's finger tips for unmatched ease of use.
Cab is pre-wired for optional field installed accessories like
radio, horn, rear work lights, electric hydraulic diverter, rear wiper/washer,
beacon light and cigarette lighter
Integrated
warning lights/turn signals and tail lights are protected from trees and
branches
Integrated
roof-mounted antenna is protected from potential damage from trees and branches
Dual roof
mounted forward work lights provide additional lighting for optimum forward
visibility at night
Standard front
windshield wiper keeps front glass clear
Optional rear
wiper/washer keeps rear glass clear
Optional front
fenders protect front cab glass from mud and debris
Optional rear
fender extensions help protect doors from mud and debris
High impact
polymer fenders are dent resistant and painted to an automotive like finish
Rear glass
swings out 70 degrees for ventilation or access to optional iMatch hitch
Large 13.8
gallon fuel tank for longer operation without refueling
Left rear fender
fuel fill with large opening for easy refueling
Fuel tank is located under left side of operator station for maximum rear
visibility
Cab safety features
ROPS – certified
to highest industry standards for maximum operator protection
Operator
presence system
If the operator
leaves the seat when the transmission, mid or rear PTO is engaged, the engine
will shut down
For stationary
PTO work, the tractor must be in neutral and the park brake fully set
Right side
emergency exit
Tempered safety
glass in case of breakage
Roof-mounted
warning lights/turn signals for road transport – two front and two rear
Two
fender-mounted tail lights
Removable slow-moving vehicle sign can be easily removed and
stored in operator's manual holder
A deluxe cloth seat with retractable seat belt is standard
equipment.
Deluxe cloth seat
An ergonomically sculpted seat cushion, an adjustable
scissor-link suspension and seat armrests are combined to provide excellent
operator comfort and support
The scissor-link
suspension can be adjusted for the operator's height and weight
Operator weight
adjustment adjusts to the operator's weight (115 to 275 lb.)
Seat is
adjustable fore and aft for operator height using lever located under the seat
Retractable seat
belts prevent belts from becoming tangled in seat suspension and controls
Optional air seat suspension is available
Air suspension seat (Option)
There
are two air-ride seat options possible in cab models. Both utilize the same
suspension, which is designed to provide an ''air-cushion'' for vertical seat
travel. This provides maximum operator comfort in any terrain. They include:
1) The optional factory installed air ride seat with a deluxe cloth 2-piece seat
with adjustable backrest and integrated armrests. (4720 only).
Seat features:
Push button at base of seat to ''pump up'' seat. Pull button to
deflate seat
Seat slides
fore/aft with lever on right-hand side of seat
Seat back
reclines with lever in lower left corner of seat cushion
Upper backrest
extension available as a field installed option
2) The optional field installed air suspension kit that requires
the existing standard seat to be re-used when installed.
Note: The deluxe 2-piece seat top can be
ordered through parts for customers who desire it.
Key benefits
include:
1) Maximum ride comfort and quality, thus minimizing operator
fatigue.
2) Dampens lower frequency vibration better than mechanical suspensions.
3) Operator weight capacity is increased to 330 lb.
4) Close-out boot provides enhanced appearance.
Lighting equipment
The lighting package for Cab tractors includes:
 Two wide-angle
halogen headlights
Two
roof-mounted, adjustable halogen forward work lights illuminate the work area in
night time or low light conditions
Two front and
two rear amber turn signals / warning lights are integrated into cab roof
Two tail lights
are integrated into fenders
Three-position (on/off/auto) interior dome light
Optional lighting
Optional lighting includes:
Dual roof mounted adjustable rear work lights
Rotating beacon light
|
